#Motul xclean vs xclean efe manual

Before using, always refer to the owner’s manual or handbook of the vehicle.Do not mix with lubricants not ACEA C3 or ACEA C2 compliant.Drain interval: according to manufacturers’ recommendations and tuned to your own use.Always refer to the owner’s manual if in doubt. May be unsuitable for use in some engines.Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF).Suitable when a “Fuel Economy” lubricant is required: ACEA C2 standard. Motul X-Clean EFE is an advanced 100 Synthetic lubricant that provides high protection and fuel economy simultaneously.a low friction, low HTHS (≥ 2.9 mPa.s) viscosity and “Mid SAPS” oil with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (≤ 0.09%) and Sulphur (≤ 0.3%). high HTHS (> 3.5 mPa.s) viscosity and “Mid SAPS” with reduced content of Sulfated Ash (≤0.8%), Phosphorus (0.07% ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%), or an ACEA C2 engine oil i.e. Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection.įor vehicles that are Euro 4, 5 or 6 emission regulation compliant and require an ACEA C3 engine oil i.e. until end of 2018 only, MOTUL 8100 X-clean 5W-40 can also be used. Approved by OEMs such as BMW Group, GM (General Motors) OPEL, MERCEDES and VW for its EFE – Extra Fuel Economy – property. MOTUL 8100 X-clean EFE 5W-30 fulfils all the specifications of BMW Long Life-04 standard of the BMW Group for BMW, MINI and ROLLS-ROYCE vehicles with no exceptions i.e. ** MB 229.52 specification is fully backward compatible with MB 229.51 and MB 229.Motul 8100 xclean EFE 5W30 is a high performance 100% Synthetic lubricant specifically designed for powerful and recent cars fitted with large displacement engines, Gasoline and direct injection turbo Diesel.Īdvanced 100% Synthetic lubricant that provides at the same time High Protection and Fuel Economy. * BMW LL-04 covers all the previous BMW specifications including BMW LL-98 and BMW LL-01 Outstanding detergent/dispersant power and better viscosity increase resistance.Environment friendly - reduces fuel consumption and therefore minimises greenhouse gases (CO2) emissions.Allows excellent oil flow at start up, faster oil pressure build up, faster revs raisings and faster operating temperature reach.Improved cold flow properties to reduce hydrodynamic friction of the oil, in order to obtain fuel economy especially when the oil is cold.

Extended drain intervals as managed by the vehicle on-board computer.High lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption.

Synthetic base stocks coupled with specific friction modifier molecules and dedicated SAPS levels that generate outstanding oil film resistance, reduce friction in the engine and provide after treatment device compatibility.

Reduces friction to ensure gains in energy savings, and therefore fuel economy benefits.

Significant oil film resistance and low emission performance during use in powerful engines.

a low friction, low HTHS viscosity.Ĭompatible with catalytic converters and Diesel Particulate Filters (DPF).ĭo not mix with lubricants that are not ACEA C3 or ACEA C2 compliant. high HTHS viscosity and mid SAPS with reduced content of sulphated ash, phosphorus and sulphur, or an ACEA C2 engine oil i.e. Suitable for vehicles that are Euro 4, 5 or 6 emission regulation compliant and require an ACEA C3 engine oil i.e. It is approved by BMW Group, GM (General Motors) Opel, Mercedes and Volkswagen for its Extra Fuel Economy (EFE) properties.Įspecially designed for the latest generation cars, powered by petrol or diesel engines, naturally aspirated or turbocharged, indirect or direct injection. Motul 8100 X-Clean EFE 5w-30 is an advanced fully synthetic petrol and diesel engine oil that provides high protection and fuel economy. Motul 8100 X-Clean EFE 5w-30 Fully Synthetic Car Engine Oil

Motul xclean vs xclean efe